Friday, May 26, 2017

Cute Little Beaded Necklace pattern


Cute Little Beaded Necklace
This pattern will be so easy to make you might start to make one for all your friends. The great thing about that too is you can probably finish them in a night and only use a handful of beads. Hope you enjoy making this Cute Little Beaded Necklace for yourself. You can also make a matching bracelet.


A = Miyuki, 11° SEED bead, color 1
B = Miyuki, 11° SEED bead, color 2

Start by waxing and stretching your thread, use Nymo D or C-Lon & a #11 or #12 beading needle. I used Fireline 6lb. crystal.  Tie in a "stopper" bead, leaving about an 8" tail and begin at step #1.
 


http://www.sandradhalpenny.com/Neck363_1-1.png

1. Pick up 3A, 1B, 1A, 2B, 1A, 1B, 2A, go with thread up thorough the 1st A bead just added.


 http://www.sandradhalpenny.com/Neck363_2-1.png

2. Pick up 2A, 3B, go with thread down through the B bead as shown, step #1.

 


 http://www.sandradhalpenny.com/Neck363_3-1.png

3. Pick up 6B, go with thread up through the 3rd B bead just added in this step.

 http://www.sandradhalpenny.com/Neck363_4-1.png

4. Pick up 5B, go with thread up through the 1st B bead, step #2.


 http://www.sandradhalpenny.com/Neck363_5-1.png

5. Pick up 5A, go with thread down thorough the 3rd B bead, step #4.


 http://www.sandradhalpenny.com/Neck363_6-1.png


6. Pick up 1A, 2B, 1A, 1B, 2A, go with thread up through the 3rd A bead, step #5.




http://www.sandradhalpenny.com/Neck363_7-1.png
7. Continue necklace by repeating steps #2 through #6 until it fits.
http://www.sandradhalpenny.com/Neck363_8-1.png
8.
To add clasp, pick up 3A, clasp, 3A, go with thread up through a couple of seed beads in necklace. Continue with thread around through the clasp beads several times for strength. Weave the working thread into the necklace and end. Repeat the clasp directions in the same manner at the other end of necklace after removing the stopper bead.

Fast Little Beaded Necklace Pattern, N0363
http://www.SandraDHalpenny.com
Sandra D. Halpenny 2017 All rights reserved
This pattern may not be copied or distributed in any way without the express written permission of the author. The purchaser of this pattern may use the finished piece for personal use and for selling at arts and crafts shows, etc. No mass production of this design is permitted without permission from the author.












Tuesday, May 2, 2017

Pearls and Gold Bracelet Pattern



This pretty bracelet is easy to make and uses a handful of seed beads and 3mm fire-polished crystals. When finished it looks like delicate lace around your wrist.


This Pattern is Free here on my Blog.
To Purchase a Downloadable PDF for 99
¢ : Click HERE

 
A = Miyuki® #593, 11/0 seed bead
B = Miyuki® #301, 11/0 seed bead
C = 3mm Fire-polished, Crystal Capri

Start by waxing and stretching your thread, use Nymo D or C-Lon & a #11 or #12 beading needle. I used Fireline 6lb. crystal.  Tie in a "stopper" bead, leaving about an 12" tail and begin at step #1.
     

1. Pick up 1C, 3B, go with thread forward through the C and 1st and 2nd B beads just added in this step.
 



2. Pick up 8A, go with thread forward through the 1st and 2nd A beads just added in this step.
 


3. Pick up 6B, go with thread forward through the 1st B bead just added in this step and the 3rd and 4th A beads added in step #2.


4. Pick up 2B, 1C, 1B, go with thread forward through the 1st b bead just added in this step and the 5th and 6th A beads, step #2.


5. Pick up 6B, go with thread forward through the 1st B bead, just added in this step, the 7th and 8th A beads, step #2, the 2nd B bead, step #1, the 1st and 2nd A beads, step #2, the 1st A bead, step #3, the 3rd and 4th A beads, step #2 and the 1st and 2nd A and 1 C beads, step #4.


6. Pick up 3B, go with thread down through the C bead, step #4 and forward through the 1st and 2nd B beads just added in this step.


7. Repeat steps #2 through #4. Pick up 6B, go with thread forward through the 1st B bead, just added in this step, the 7th and 8th A beads, step #2 and up through the 3rd B bead, step #6.


8. Pick up 3A, go with thread right to left through the 1st B bead, step #4 or #7(c) and up through the 5th and 6th A beads, step #2 or #7(a) and the 6th B bead, step #5 or #7(d).


9. Pick up 3A, go with thread left to right through the 2nd A bead, step #8.



10. Pick up 2A, 4B, go with thread down through the 2nd ans 3rd A beads, step #9, the 2nd A bead, step #8 and up through the 2 A and 1st and 2nd B beads just added in this step.
 

11.  Pick up 1B, go with thread down through the 3rd and 4th B beads, step #10, the 2nd and 3rd A beads, step #9, the 2nd A bead, step #8 and up through the 1st and 2nd A beads, step #10.



12. Pick up 1A, go with thread down through the 2nd and 1st B beads, step #7(d). following blue line in drawing weave through with working thread, coming out at the 1st B bead, step #6.


13. Pick up 3A, go with thread up through the 3rd B bead, step #4 or #7(c), down through the 4th and 3rd A beads, step #4 or #7(a) and the 2nd B bead, step #4 or #7(b).
  
14. a) Pick up 3A, go with thread left to right through the 2nd A bead, step #13.
b) Pick up 2A, 4B, go with thread forward through the 2nd and 3rd A beads, this step at (a), the 2nd A bead, step #13 and through the 2 A and 1st and 2nd B beads just added in this step.
c) Pick up 1B, go with thread forward through the 3rd and 4th B beads, this step at (b), the 2nd and 3rd A beads, this step at (a), the 2nd A bead, step #13 and the 1st and 2nd A beads, this step at (b). 
d) 
Pick up 1A, with working thread follow blue line up in drawing, coming out with thread down at the 1 C bead added in step #7(c).

15. Continue bracelet by repeating steps #6 through #14 until it fits.



16. To add clasp, pick up 4A, clasp, 4A, go with thread up through the C bead in bracelet. Continue with working thread around through the clasp beads several times. Weave the working thread into the bracelet and end. Repeat the clasp directions in the same manner on the other end after removing the stopper bead.









Pearls and Gold Bracelet Pattern, B0165
http://www.SandraDHalpenny.com
Sandra D. Halpenny © 2007 - 2017 All rights reserved

Canadian Intellectual Property Office
This pattern may not be copied or distributed in any way without the express written permission of the author. The purchaser of this pattern may use the finished piece for personal use and for selling at arts and crafts shows, etc. No mass production of this design is permitted without permission from the author




Reversible 3-D Bracelet Pattern

Bouquet Bracelet Pattern